Bulldozer ENGINE - powerful 3 cylinders long stroke diesel engine: | Bore: | | 95mm | | Stroke: | | 105mm | | Capacity: | | 2.23L | | Cy1inders: | | 3 | | Aspiration: | | N | | Max. power: | | 22kW @ 2,000 rpm | | Lubrication: | | Full pressure by rotary pump | | Optimum fuel consumption: | | 234g/kW | TRANSMISSION: | Clutch: | | Direct-drive single dry disk diaphragm-spring clutch 10" or hydraulic reverse shuttle clutch | | Gearbox: | | 8 fwd + 2 rev (direct-drive) or
8 fwd + 8 rev (reverse shuttle) | BRAKES & STEERING - steering paddles integrated with the brake paddles: | Steering clutches: | | Multiple dry cerametallic disk clutches | | Brakes: | | Band brakes | POWER TAKE-OFF - mechanical dependent: | 2 Speeds: | | 540 & 1,000 rpm | | Shaft diameter: | | 35mm (1 3/8"), 6 splines | UNDERCARRIAGE-ROLLERS - semi-rigid track frame: | Track rollers: | | 5 + 1 (each side) | | Track recoil system: | | Helical spring, screw adjusted | | Width of track shoes: | | 300mm (standard) | | | 260mm (optional) | HYDRAULIC SYSTEM - blade & hitch: | Capacity @ governed rpm: | | 25.2 Lpm | | Relief valve pressure: | | 16 MPa (,2230 psi) | | Control valve: | | 4-spool | | Blade control - lift: | | Raise, hold, lower, float | | - Angle: | | Right, hold, left | | - Tilt: | | Right, hole, left | | Blade capacity: | | 0.67m3 | | Lifting capacity @ hitch point: | | 7,350N (1,650 lbs) | WEIGHTS & DIMENSIONS - (in running order): | Max. length: | | 2,960mm | Max. width:
(with blade, straight) | | 1,640mm | Tractor width:
(no blade) | | 1,450mm (standard) | | | 1,410mm (optional) | | Track gauge: | | 1,150mm | | Ground clearance: | | 240-245mm | | Operating weight: | | 2,830kg (standard) | | | 2,790kg (optional) | | Max. draw bar pull: | | 2,350kg (steel track version) | | | 1,960kg (rubber track version) | Pricing Sold on indent basis - 50% deposit / 50% on delivery. Price subject to confirmation. Fully assembled and serviced. Ready to use. | | 
|
